######### 1 #########

Nov 19 00:57:34 node3 kernel: Linux version 2.6.17-2-k7 (Debian 2.6.17-9) (waldi@debian.org) (gcc version 4.1.2 20060901 (prerelease) (Debian 4.1.1-13)) #1 SMP Wed Sep 13 17:18:46 UTC 2006
Nov 19 00:57:34 node3 kernel: BIOS-provided physical RAM map:
Nov 19 00:57:34 node3 kernel:  BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
Nov 19 00:57:34 node3 kernel:  BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
Nov 19 00:57:34 node3 kernel:  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
Nov 19 00:57:34 node3 kernel:  BIOS-e820: 0000000000100000 - 000000003fef0000 (usable)
Nov 19 00:57:34 node3 kernel:  BIOS-e820: 000000003fef0000 - 000000003fef3000 (ACPI NVS)
Nov 19 00:57:34 node3 kernel:  BIOS-e820: 000000003fef3000 - 000000003ff00000 (ACPI data)
Nov 19 00:57:34 node3 kernel:  BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
Nov 19 00:57:34 node3 kernel: 0MB HIGHMEM available.
Nov 19 00:57:34 node3 kernel: 1022MB LOWMEM available.
Nov 19 00:57:34 node3 kernel: found SMP MP-table at 000f4f60
Nov 19 00:57:34 node3 kernel: DMI 2.3 present.
Nov 19 00:57:34 node3 kernel: ACPI: PM-Timer IO Port: 0x4008
Nov 19 00:57:34 node3 kernel: ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Nov 19 00:57:34 node3 kernel: Processor #0 15:7 APIC version 16
Nov 19 00:57:34 node3 kernel: ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
Nov 19 00:57:34 node3 kernel: ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
Nov 19 00:57:34 node3 kernel: ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
Nov 19 00:57:34 node3 kernel: ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
Nov 19 00:57:34 node3 kernel: IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
Nov 19 00:57:34 node3 kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Nov 19 00:57:34 node3 kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
Nov 19 00:57:34 node3 kernel: Enabling APIC mode:  Flat.  Using 1 I/O APICs
Nov 19 00:57:34 node3 kernel: Using ACPI (MADT) for SMP configuration information
Nov 19 00:57:34 node3 kernel: Allocating PCI resources starting at 40000000 (gap: 3ff00000:bed00000)
Nov 19 00:57:34 node3 kernel: Built 1 zonelists
Nov 19 00:57:34 node3 kernel: Kernel command line: auto BOOT_IMAGE=Linux ro root=900 panic=10,append=elevator=deadline
Nov 19 00:57:34 node3 kernel: Enabling fast FPU save and restore... done.
Nov 19 00:57:34 node3 kernel: Enabling unmasked SIMD FPU exception support... done.
Nov 19 00:57:34 node3 kernel: Initializing CPU#0
Nov 19 00:57:34 node3 kernel: PID hash table entries: 4096 (order: 12, 16384 bytes)
Nov 19 00:57:34 node3 kernel: Detected 2199.976 MHz processor.
Nov 19 00:57:34 node3 kernel: Using pmtmr for high-res timesource
Nov 19 00:57:34 node3 kernel: Console: colour VGA+ 80x25
Nov 19 00:57:34 node3 kernel: Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Nov 19 00:57:34 node3 kernel: Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Nov 19 00:57:34 node3 kernel: Memory: 1030860k/1047488k available (1493k kernel code, 16124k reserved, 546k data, 196k init, 0k highmem)
Nov 19 00:57:34 node3 kernel: Checking if this processor honours the WP bit even in supervisor mode... Ok.
Nov 19 00:57:34 node3 kernel: Calibrating delay using timer specific routine.. 4405.88 BogoMIPS (lpj=8811775)
Nov 19 00:57:34 node3 kernel: Security Framework v1.0.0 initialized
Nov 19 00:57:34 node3 kernel: SELinux:  Disabled at boot.
Nov 19 00:57:34 node3 kernel: Capability LSM initialized
Nov 19 00:57:34 node3 kernel: Mount-cache hash table entries: 512
Nov 19 00:57:34 node3 kernel: CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
Nov 19 00:57:34 node3 kernel: CPU: L2 Cache: 1024K (64 bytes/line)
Nov 19 00:57:34 node3 kernel: Intel machine check architecture supported.
Nov 19 00:57:34 node3 kernel: Intel machine check reporting enabled on CPU#0.
Nov 19 00:57:34 node3 kernel: Checking 'hlt' instruction... OK.
Nov 19 00:57:34 node3 kernel: SMP alternatives: switching to UP code
Nov 19 00:57:34 node3 kernel: Freeing SMP alternatives: 16k freed
Nov 19 00:57:34 node3 kernel: CPU0: AMD Athlon(tm) 64 Processor 3700+ stepping 01
Nov 19 00:57:34 node3 kernel: Total of 1 processors activated (4405.88 BogoMIPS).
Nov 19 00:57:34 node3 kernel: ENABLING IO-APIC IRQs
Nov 19 00:57:34 node3 kernel: ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=0 pin2=0
Nov 19 00:57:34 node3 kernel: Brought up 1 CPUs
Nov 19 00:57:34 node3 kernel: migration_cost=0
Nov 19 00:57:34 node3 kernel: checking if image is initramfs... it is
Nov 19 00:57:34 node3 kernel: Freeing initrd memory: 4538k freed
Nov 19 00:57:34 node3 kernel: NET: Registered protocol family 16
Nov 19 00:57:34 node3 kernel: ACPI: bus type pci registered
Nov 19 00:57:34 node3 kernel: PCI: PCI BIOS revision 2.10 entry at 0xfb050, last bus=1
Nov 19 00:57:34 node3 kernel: Setting up standard PCI resources
Nov 19 00:57:34 node3 kernel: ACPI: Subsystem revision 20060127
Nov 19 00:57:34 node3 kernel: ACPI: Interpreter enabled
Nov 19 00:57:34 node3 kernel: ACPI: Using IOAPIC for interrupt routing
Nov 19 00:57:34 node3 kernel: ACPI: PCI Root Bridge [PCI0] (0000:00)
Nov 19 00:57:34 node3 kernel: PCI: Quirk-MSI-K8T Soundcard On
Nov 19 00:57:34 node3 kernel: PCI: Unexpected Value in PCI-Register: no Change!
Nov 19 00:57:34 node3 kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12)
Nov 19 00:57:34 node3 kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 *11 12)
Nov 19 00:57:34 node3 kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 11 *12)
Nov 19 00:57:34 node3 kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12) *0, disabled.
Nov 19 00:57:34 node3 kernel: ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12) *0, disabled.
Nov 19 00:57:34 node3 kernel: ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12) *0, disabled.
Nov 19 00:57:34 node3 kernel: ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 6 7 10 11 12) *0, disabled.
Nov 19 00:57:34 node3 kernel: ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 6 7 10 11 12) *0, disabled.
Nov 19 00:57:34 node3 kernel: ACPI: PCI Interrupt Link [ALKA] (IRQs *20)
Nov 19 00:57:34 node3 kernel: ACPI: PCI Interrupt Link [ALKB] (IRQs *21)
Nov 19 00:57:34 node3 kernel: ACPI: PCI Interrupt Link [ALKC] (IRQs *22), disabled.
Nov 19 00:57:34 node3 kernel: ACPI: PCI Interrupt Link [ALKD] (IRQs *23), disabled.
Nov 19 00:57:34 node3 kernel: Linux Plug and Play Support v0.97 (c) Adam Belay
Nov 19 00:57:34 node3 kernel: pnp: PnP ACPI init
Nov 19 00:57:34 node3 kernel: pnp: PnP ACPI: found 13 devices
Nov 19 00:57:34 node3 kernel: PnPBIOS: Disabled by ACPI PNP
Nov 19 00:57:34 node3 kernel: PCI: Using ACPI for IRQ routing
Nov 19 00:57:34 node3 kernel: PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
Nov 19 00:57:34 node3 kernel: pnp: 00:02: ioport range 0x4000-0x407f could not be reserved
Nov 19 00:57:34 node3 kernel: pnp: 00:02: ioport range 0x5000-0x500f has been reserved
Nov 19 00:57:34 node3 kernel: PCI: Bridge: 0000:00:01.0
Nov 19 00:57:34 node3 kernel:   IO window: disabled.
Nov 19 00:57:34 node3 kernel:   MEM window: fa000000-fcffffff
Nov 19 00:57:34 node3 kernel:   PREFETCH window: f8000000-f9ffffff
Nov 19 00:57:34 node3 kernel: NET: Registered protocol family 2
Nov 19 00:57:34 node3 kernel: IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
Nov 19 00:57:34 node3 kernel: TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
Nov 19 00:57:34 node3 kernel: TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
Nov 19 00:57:34 node3 kernel: TCP: Hash tables configured (established 131072 bind 65536)
Nov 19 00:57:34 node3 kernel: TCP reno registered
Nov 19 00:57:34 node3 kernel: audit: initializing netlink socket (disabled)
Nov 19 00:57:34 node3 kernel: audit(1163894240.132:1): initialized
Nov 19 00:57:34 node3 kernel: VFS: Disk quotas dquot_6.5.1
Nov 19 00:57:34 node3 kernel: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Nov 19 00:57:34 node3 kernel: Initializing Cryptographic API
Nov 19 00:57:34 node3 kernel: io scheduler noop registered
Nov 19 00:57:34 node3 kernel: io scheduler anticipatory registered (default)
Nov 19 00:57:34 node3 kernel: io scheduler deadline registered
Nov 19 00:57:34 node3 kernel: io scheduler cfq registered
Nov 19 00:57:34 node3 kernel: isapnp: Scanning for PnP cards...
Nov 19 00:57:34 node3 kernel: isapnp: No Plug & Play device found
Nov 19 00:57:34 node3 kernel: Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
Nov 19 00:57:34 node3 kernel: serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Nov 19 00:57:34 node3 kernel: serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Nov 19 00:57:34 node3 kernel: RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
Nov 19 00:57:34 node3 kernel: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
Nov 19 00:57:34 node3 kernel: PNP: PS/2 controller doesn't have AUX irq; using default 12
Nov 19 00:57:34 node3 kernel: serio: i8042 AUX port at 0x60,0x64 irq 12
Nov 19 00:57:34 node3 kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
Nov 19 00:57:34 node3 kernel: TCP bic registered
Nov 19 00:57:34 node3 kernel: NET: Registered protocol family 1
Nov 19 00:57:34 node3 kernel: NET: Registered protocol family 17
Nov 19 00:57:34 node3 kernel: NET: Registered protocol family 8
Nov 19 00:57:34 node3 kernel: NET: Registered protocol family 20
Nov 19 00:57:34 node3 kernel: Using IPI No-Shortcut mode
Nov 19 00:57:34 node3 kernel: ACPI wakeup devices: 
Nov 19 00:57:34 node3 kernel: PCI0 USB0 USB1 USB2 USB3 USB4 USB5 USB6 USB7 LAN0 AC97 UAR1 
Nov 19 00:57:34 node3 kernel: ACPI: (supports S0 S1 S4 S5)
Nov 19 00:57:34 node3 kernel: Freeing unused kernel memory: 196k freed
Nov 19 00:57:34 node3 kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
Nov 19 00:57:34 node3 kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Nov 19 00:57:34 node3 kernel: VP_IDE: IDE controller at PCI slot 0000:00:0f.1
Nov 19 00:57:34 node3 kernel: ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 20
Nov 19 00:57:34 node3 kernel: ACPI: PCI Interrupt 0000:00:0f.1[A] -> Link [ALKA] -> GSI 20 (level, low) -> IRQ 169
Nov 19 00:57:34 node3 kernel: PCI: VIA IRQ fixup for 0000:00:0f.1, from 255 to 9
Nov 19 00:57:34 node3 kernel: VP_IDE: chipset revision 6
Nov 19 00:57:34 node3 kernel: VP_IDE: not 100%% native mode: will probe irqs later
Nov 19 00:57:34 node3 kernel: VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci0000:00:0f.1
Nov 19 00:57:34 node3 kernel:     ide0: BM-DMA at 0xe700-0xe707, BIOS settings: hda:pio, hdb:pio
Nov 19 00:57:34 node3 kernel:     ide1: BM-DMA at 0xe708-0xe70f, BIOS settings: hdc:pio, hdd:pio
Nov 19 00:57:34 node3 kernel: input: AT Translated Set 2 keyboard as /class/input/input0
Nov 19 00:57:34 node3 kernel: input: AT Translated Set 2 keyboard as /class/input/input1
Nov 19 00:57:34 node3 kernel: SCSI subsystem initialized
Nov 19 00:57:34 node3 kernel: ACPI: PCI Interrupt 0000:00:0f.0[B] -> Link [ALKA] -> GSI 20 (level, low) -> IRQ 169
Nov 19 00:57:34 node3 kernel: sata_via 0000:00:0f.0: routed to hard irq line 11
Nov 19 00:57:34 node3 kernel: ata1: SATA max UDMA/133 cmd 0xE100 ctl 0xE202 bmdma 0xE500 irq 169
Nov 19 00:57:34 node3 kernel: ata2: SATA max UDMA/133 cmd 0xE300 ctl 0xE402 bmdma 0xE508 irq 169
Nov 19 00:57:34 node3 kernel: ata1: SATA link up 1.5 Gbps (SStatus 113)
Nov 19 00:57:34 node3 kernel: ata1: dev 0 ATA-7, max UDMA/133, 312581808 sectors: LBA48
Nov 19 00:57:34 node3 kernel: ata1: dev 0 configured for UDMA/133
Nov 19 00:57:34 node3 kernel: scsi0 : sata_via
Nov 19 00:57:34 node3 kernel: ata2: SATA link up 1.5 Gbps (SStatus 113)
Nov 19 00:57:34 node3 kernel: ata2: dev 0 ATA-7, max UDMA/133, 312581808 sectors: LBA48
Nov 19 00:57:34 node3 kernel: ata2: dev 0 configured for UDMA/133
Nov 19 00:57:34 node3 kernel: scsi1 : sata_via
Nov 19 00:57:34 node3 kernel:   Vendor: ATA       Model: ST3160811AS       Rev: 3.AA
Nov 19 00:57:34 node3 kernel:   Type:   Direct-Access                      ANSI SCSI revision: 05
Nov 19 00:57:34 node3 kernel: SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB)
Nov 19 00:57:34 node3 kernel: sda: Write Protect is off
Nov 19 00:57:34 node3 kernel: SCSI device sda: drive cache: write back
Nov 19 00:57:34 node3 kernel: SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB)
Nov 19 00:57:34 node3 kernel: sda: Write Protect is off
Nov 19 00:57:34 node3 kernel: SCSI device sda: drive cache: write back
Nov 19 00:57:34 node3 kernel:  sda: sda1 sda2 sda3
Nov 19 00:57:34 node3 kernel: sd 0:0:0:0: Attached scsi disk sda
Nov 19 00:57:34 node3 kernel:   Vendor: ATA       Model: ST3160811AS       Rev: 3.AA
Nov 19 00:57:34 node3 kernel:   Type:   Direct-Access                      ANSI SCSI revision: 05
Nov 19 00:57:34 node3 kernel: SCSI device sdb: 312581808 512-byte hdwr sectors (160042 MB)
Nov 19 00:57:34 node3 kernel: sdb: Write Protect is off
Nov 19 00:57:34 node3 kernel: SCSI device sdb: drive cache: write back
Nov 19 00:57:34 node3 kernel: SCSI device sdb: 312581808 512-byte hdwr sectors (160042 MB)
Nov 19 00:57:34 node3 kernel: sdb: Write Protect is off
Nov 19 00:57:34 node3 kernel: SCSI device sdb: drive cache: write back
Nov 19 00:57:34 node3 kernel:  sdb: sdb1 sdb2 sdb3
Nov 19 00:57:34 node3 kernel: sd 1:0:0:0: Attached scsi disk sdb
Nov 19 00:57:34 node3 kernel: md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
Nov 19 00:57:34 node3 kernel: md: bitmap version 4.39
Nov 19 00:57:34 node3 kernel: md: raid1 personality registered for level 1
Nov 19 00:57:34 node3 kernel: md: raid0 personality registered for level 0
Nov 19 00:57:34 node3 kernel: usbcore: registered new driver usbfs
Nov 19 00:57:34 node3 kernel: usbcore: registered new driver hub
Nov 19 00:57:34 node3 kernel: ACPI: PCI Interrupt Link [ALKB] enabled at IRQ 21
Nov 19 00:57:34 node3 kernel: ACPI: PCI Interrupt 0000:00:10.4[C] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 177
Nov 19 00:57:34 node3 kernel: ehci_hcd 0000:00:10.4: EHCI Host Controller
Nov 19 00:57:34 node3 kernel: ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1
Nov 19 00:57:34 node3 kernel: ehci_hcd 0000:00:10.4: irq 177, io mem 0xfd020000
Nov 19 00:57:34 node3 kernel: ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
Nov 19 00:57:34 node3 kernel: usb usb1: configuration #1 chosen from 1 choice
Nov 19 00:57:34 node3 kernel: hub 1-0:1.0: USB hub found
Nov 19 00:57:34 node3 kernel: hub 1-0:1.0: 8 ports detected
Nov 19 00:57:34 node3 kernel: USB Universal Host Controller Interface driver v3.0
Nov 19 00:57:34 node3 kernel: ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 177
Nov 19 00:57:34 node3 kernel: PCI: VIA IRQ fixup for 0000:00:10.0, from 10 to 1
Nov 19 00:57:34 node3 kernel: uhci_hcd 0000:00:10.0: UHCI Host Controller
Nov 19 00:57:34 node3 kernel: uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
Nov 19 00:57:34 node3 kernel: uhci_hcd 0000:00:10.0: irq 177, io base 0x0000e800
Nov 19 00:57:34 node3 kernel: usb usb2: configuration #1 chosen from 1 choice
Nov 19 00:57:34 node3 kernel: hub 2-0:1.0: USB hub found
Nov 19 00:57:34 node3 kernel: hub 2-0:1.0: 2 ports detected
Nov 19 00:57:34 node3 kernel: ACPI: PCI Interrupt 0000:00:10.1[A] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 177
Nov 19 00:57:34 node3 kernel: PCI: VIA IRQ fixup for 0000:00:10.1, from 10 to 1
Nov 19 00:57:34 node3 kernel: uhci_hcd 0000:00:10.1: UHCI Host Controller
Nov 19 00:57:34 node3 kernel: uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
Nov 19 00:57:34 node3 kernel: uhci_hcd 0000:00:10.1: irq 177, io base 0x0000e900
Nov 19 00:57:34 node3 kernel: usb usb3: configuration #1 chosen from 1 choice
Nov 19 00:57:34 node3 kernel: hub 3-0:1.0: USB hub found
Nov 19 00:57:34 node3 kernel: hub 3-0:1.0: 2 ports detected
Nov 19 00:57:34 node3 kernel: ACPI: PCI Interrupt 0000:00:10.2[B] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 177
Nov 19 00:57:34 node3 kernel: PCI: VIA IRQ fixup for 0000:00:10.2, from 11 to 1
Nov 19 00:57:34 node3 kernel: uhci_hcd 0000:00:10.2: UHCI Host Controller
Nov 19 00:57:34 node3 kernel: uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
Nov 19 00:57:34 node3 kernel: uhci_hcd 0000:00:10.2: irq 177, io base 0x0000ea00
Nov 19 00:57:34 node3 kernel: usb usb4: configuration #1 chosen from 1 choice
Nov 19 00:57:34 node3 kernel: hub 4-0:1.0: USB hub found
Nov 19 00:57:34 node3 kernel: hub 4-0:1.0: 2 ports detected
Nov 19 00:57:34 node3 kernel: ACPI: PCI Interrupt 0000:00:10.3[B] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 177
Nov 19 00:57:34 node3 kernel: PCI: VIA IRQ fixup for 0000:00:10.3, from 11 to 1
Nov 19 00:57:34 node3 kernel: uhci_hcd 0000:00:10.3: UHCI Host Controller
Nov 19 00:57:34 node3 kernel: uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5
Nov 19 00:57:34 node3 kernel: uhci_hcd 0000:00:10.3: irq 177, io base 0x0000eb00
Nov 19 00:57:34 node3 kernel: usb usb5: configuration #1 chosen from 1 choice
Nov 19 00:57:34 node3 kernel: hub 5-0:1.0: USB hub found
Nov 19 00:57:34 node3 kernel: hub 5-0:1.0: 2 ports detected
Nov 19 00:57:34 node3 kernel: r8169 Gigabit Ethernet driver 2.2LK-NAPI loaded
Nov 19 00:57:34 node3 kernel: ACPI: PCI Interrupt 0000:00:0d.0[A] -> GSI 16 (level, low) -> IRQ 185
Nov 19 00:57:34 node3 kernel: eth0: RTL8169 at 0xf0824000, 00:16:17:6b:35:34, IRQ 185
Nov 19 00:57:34 node3 kernel: md: linear personality registered for level -1
Nov 19 00:57:34 node3 kernel: md: multipath personality registered for level -4
Nov 19 00:57:34 node3 kernel: raid5: automatically using best checksumming function: pIII_sse
Nov 19 00:57:34 node3 kernel:    pIII_sse  :  6719.000 MB/sec
Nov 19 00:57:34 node3 kernel: raid5: using function: pIII_sse (6719.000 MB/sec)
Nov 19 00:57:34 node3 kernel: md: raid5 personality registered for level 5
Nov 19 00:57:34 node3 kernel: md: raid4 personality registered for level 4
Nov 19 00:57:34 node3 kernel: raid6: int32x1    827 MB/s
Nov 19 00:57:34 node3 kernel: raid6: int32x2    926 MB/s
Nov 19 00:57:34 node3 kernel: raid6: int32x4    809 MB/s
Nov 19 00:57:34 node3 kernel: raid6: int32x8    570 MB/s
Nov 19 00:57:34 node3 kernel: raid6: mmxx1     1828 MB/s
Nov 19 00:57:34 node3 kernel: raid6: mmxx2     3315 MB/s
Nov 19 00:57:34 node3 kernel: raid6: sse1x1    1651 MB/s
Nov 19 00:57:34 node3 kernel: raid6: sse1x2    2677 MB/s
Nov 19 00:57:34 node3 kernel: raid6: sse2x1    2797 MB/s
Nov 19 00:57:34 node3 kernel: raid6: sse2x2    3371 MB/s
Nov 19 00:57:34 node3 kernel: raid6: using algorithm sse2x2 (3371 MB/s)
Nov 19 00:57:34 node3 kernel: md: raid6 personality registered for level 6
Nov 19 00:57:34 node3 kernel: md: raid10 personality registered for level 10
Nov 19 00:57:34 node3 kernel: md: md0 stopped.
Nov 19 00:57:34 node3 kernel: md: bind<sdb1>
Nov 19 00:57:34 node3 kernel: md: bind<sda1>
Nov 19 00:57:34 node3 kernel: raid1: raid set md0 active with 2 out of 2 mirrors
Nov 19 00:57:34 node3 kernel: md: md1 stopped.
Nov 19 00:57:34 node3 kernel: md: bind<sdb3>
Nov 19 00:57:34 node3 kernel: md: bind<sda3>
Nov 19 00:57:34 node3 kernel: md1: setting max_sectors to 128, segment boundary to 32767
Nov 19 00:57:34 node3 kernel: raid0: looking at sda3
Nov 19 00:57:34 node3 kernel: raid0:   comparing sda3(125041856) with sda3(125041856)
Nov 19 00:57:34 node3 kernel: raid0:   END
Nov 19 00:57:34 node3 kernel: raid0:   ==> UNIQUE
Nov 19 00:57:34 node3 kernel: raid0: 1 zones
Nov 19 00:57:34 node3 kernel: raid0: looking at sdb3
Nov 19 00:57:34 node3 kernel: raid0:   comparing sdb3(125041856) with sda3(125041856)
Nov 19 00:57:34 node3 kernel: raid0:   EQUAL
Nov 19 00:57:34 node3 kernel: raid0: FINAL 1 zones
Nov 19 00:57:34 node3 kernel: raid0: done.
Nov 19 00:57:34 node3 kernel: raid0 : md_size is 250083712 blocks.
Nov 19 00:57:34 node3 kernel: raid0 : conf->hash_spacing is 250083712 blocks.
Nov 19 00:57:34 node3 kernel: raid0 : nb_zone is 1.
Nov 19 00:57:34 node3 kernel: raid0 : Allocating 4 bytes for hash.
Nov 19 00:57:34 node3 kernel: EXT3-fs: INFO: recovery required on readonly filesystem.
Nov 19 00:57:34 node3 kernel: EXT3-fs: write access will be enabled during recovery.
Nov 19 00:57:34 node3 kernel: kjournald starting.  Commit interval 5 seconds
Nov 19 00:57:34 node3 kernel: EXT3-fs: md0: orphan cleanup on readonly fs
Nov 19 00:57:34 node3 kernel: EXT3-fs: md0: 15 orphan inodes deleted
Nov 19 00:57:34 node3 kernel: EXT3-fs: recovery complete.
Nov 19 00:57:34 node3 kernel: EXT3-fs: mounted filesystem with ordered data mode.
Nov 19 00:57:34 node3 kernel: Real Time Clock Driver v1.12ac
Nov 19 00:57:34 node3 kernel: input: PC Speaker as /class/input/input2
Nov 19 00:57:34 node3 kernel: Linux agpgart interface v0.101 (c) Dave Jones
Nov 19 00:57:34 node3 kernel: agpgart: Detected AGP bridge 0
Nov 19 00:57:34 node3 kernel: agpgart: AGP aperture is 128M @ 0xf0000000
Nov 19 00:57:34 node3 kernel: 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Nov 19 00:57:34 node3 kernel: 00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Nov 19 00:57:34 node3 kernel: atkbd.c: Spurious ACK on isa0060/serio0. Some program, like XFree86, might be trying access hardware directly.
Nov 19 00:57:34 node3 kernel: parport: PnPBIOS parport detected.
Nov 19 00:57:34 node3 kernel: parport0: PC-style at 0x378, irq 7 [PCSPP]
Nov 19 00:57:34 node3 kernel: FDC 0 is a post-1991 82077
Nov 19 00:57:34 node3 kernel: pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Nov 19 00:57:34 node3 kernel: shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Nov 19 00:57:34 node3 kernel: Adding 1951888k swap on /dev/sda2.  Priority:1 extents:1 across:1951888k
Nov 19 00:57:34 node3 kernel: Adding 1951888k swap on /dev/sdb2.  Priority:1 extents:1 across:1951888k
Nov 19 00:57:34 node3 kernel: EXT3 FS on md0, internal journal
Nov 19 00:57:34 node3 kernel: device-mapper: 4.6.0-ioctl (2006-02-17) initialised: dm-devel@redhat.com
Nov 19 00:57:34 node3 kernel: kjournald starting.  Commit interval 5 seconds
Nov 19 00:57:34 node3 kernel: EXT3 FS on md1, internal journal
Nov 19 00:57:34 node3 kernel: EXT3-fs: mounted filesystem with ordered data mode.
Nov 19 00:57:34 node3 kernel: r8169: eth0: link up
Nov 19 00:57:34 node3 kernel: IPv4 over IPv4 tunneling driver
Nov 19 00:57:38 node3 kernel: NET: Registered protocol family 10
Nov 19 00:57:38 node3 kernel: lo: Disabled Privacy Extensions
Nov 19 00:57:38 node3 kernel: IPv6 over IPv4 tunneling driver
Nov 19 03:11:28 node3 last message repeated 2 times
Nov 19 03:29:34 node3 kernel: f0872d73
Nov 19 03:29:34 node3 kernel: Modules linked in: ipv6 ipip tunnel4 dm_snapshot dm_mirror dm_mod shpchp pci_hotplug floppy i2c_viapro parport_pc i2c_core psmouse parport 8250_pnp serio_raw evdev amd64_agp agpgart pcspkr rtc raid10 raid6 raid5 xor multipath linear ide_generic r8169 uhci_hcd ehci_hcd usbcore thermal processor fan raid0 raid1 md_mod sata_via sd_mod libata scsi_mod via82cxxx ide_core ext3 jbd mbcache
Nov 19 03:29:34 node3 kernel: EIP:    0060:[<f0872d73>]    Not tainted VLI
Nov 19 03:29:34 node3 kernel: EFLAGS: 00210246   (2.6.17-2-k7 #1) 
Nov 19 03:29:34 node3 kernel:  BUG: warning at kernel/softirq.c:141/local_bh_enable()
Nov 19 03:29:34 node3 kernel:  <b0120e27> local_bh_enable+0x25/0x64  <b0218215> lock_sock+0x85/0x8d
Nov 19 03:29:34 node3 kernel:  <b021604b> sock_fasync+0x5c/0x111  <b0216fa1> sock_close+0x1e/0x2a
Nov 19 03:29:34 node3 kernel:  <b0153fcd> __fput+0x87/0x13c  <b0151b57> filp_close+0x4e/0x54
Nov 19 03:29:34 node3 kernel:  <b011e0a1> put_files_struct+0x64/0xa6  <b011f006> do_exit+0x1b0/0x6be
Nov 19 03:29:34 node3 kernel:  <b0114e08> bust_spinlocks+0x3a/0x43  <b0103ee6> die+0x1d3/0x288
Nov 19 03:29:34 node3 kernel:  <b0103f76> die+0x263/0x288  <b011533a> do_page_fault+0x441/0x526
Nov 19 03:29:34 node3 kernel:  <b0114ef9> do_page_fault+0x0/0x526  <b01036f7> error_code+0x4f/0x54
Nov 19 03:29:34 node3 kernel:  <f0872d73> ext3_xattr_delete_inode+0x5/0xab [ext3]  <f0865bcb> ext3_free_inode+0x92/0x2c7 [ext3]
Nov 19 03:29:34 node3 kernel:  <f08666ee> ext3_mark_inode_dirty+0x20/0x27 [ext3]  <f08687dd> ext3_delete_inode+0xa3/0xba [ext3]
Nov 19 03:29:34 node3 kernel:  <f086873a> ext3_delete_inode+0x0/0xba [ext3]  <b016809c> generic_delete_inode+0x9e/0x101
Nov 19 03:29:34 node3 kernel:  <b0167b87> iput+0x5e/0x60  <b0166d66> dput+0xfe/0x116
Nov 19 03:29:34 node3 kernel:  <b0160a4f> sys_renameat+0x15f/0x1b9  <b01b04d2> _atomic_dec_and_lock+0x2a/0x44
Nov 19 03:29:34 node3 kernel:  <b0160aba> sys_rename+0x11/0x15  <b0102af3> sysenter_past_esp+0x54/0x75
Nov 19 03:29:34 node3 kernel: BUG: warning at kernel/softirq.c:141/local_bh_enable()
Nov 19 03:29:34 node3 kernel:  <b0120e27> local_bh_enable+0x25/0x64  <b02160f4> sock_fasync+0x105/0x111
Nov 19 03:29:34 node3 kernel:  <b0216fa1> sock_close+0x1e/0x2a  <b0153fcd> __fput+0x87/0x13c
Nov 19 03:29:34 node3 kernel:  <b0151b57> filp_close+0x4e/0x54  <b011e0a1> put_files_struct+0x64/0xa6
Nov 19 03:29:34 node3 kernel:  <b011f006> do_exit+0x1b0/0x6be  <b0114e08> bust_spinlocks+0x3a/0x43
Nov 19 03:29:34 node3 kernel:  <b0103ee6> die+0x1d3/0x288  <b0103f76> die+0x263/0x288
Nov 19 03:29:34 node3 kernel:  <b011533a> do_page_fault+0x441/0x526  <b0114ef9> do_page_fault+0x0/0x526
Nov 19 03:29:34 node3 kernel:  <b01036f7> error_code+0x4f/0x54  <f0872d73> ext3_xattr_delete_inode+0x5/0xab [ext3]
Nov 19 03:29:34 node3 kernel:  <f0865bcb> ext3_free_inode+0x92/0x2c7 [ext3]  <f08666ee> ext3_mark_inode_dirty+0x20/0x27 [ext3]
Nov 19 03:29:34 node3 kernel:  <f08687dd> ext3_delete_inode+0xa3/0xba [ext3]  <f086873a> ext3_delete_inode+0x0/0xba [ext3]
Nov 19 03:29:34 node3 kernel:  <b016809c> generic_delete_inode+0x9e/0x101  <b0167b87> iput+0x5e/0x60
Nov 19 03:29:34 node3 kernel:  <b0166d66> dput+0xfe/0x116  <b0160a4f> sys_renameat+0x15f/0x1b9
Nov 19 03:29:34 node3 kernel:  <b01b04d2> _atomic_dec_and_lock+0x2a/0x44  <b0160aba> sys_rename+0x11/0x15
Nov 19 03:29:34 node3 kernel:  <b0102af3> sysenter_past_esp+0x54/0x75 
Nov 19 03:29:34 node3 kernel: BUG: warning at kernel/softirq.c:141/local_bh_enable()
Nov 19 03:29:34 node3 kernel:  <b0120e27> local_bh_enable+0x25/0x64  <b0269ca6> unix_release_sock+0x5c/0x1bf
Nov 19 03:29:34 node3 kernel:  <b0216ce8> sock_release+0x11/0x85  <b0216fa9> sock_close+0x26/0x2a
Nov 19 03:29:34 node3 kernel:  <b0153fcd> __fput+0x87/0x13c  <b0151b57> filp_close+0x4e/0x54
Nov 19 03:29:34 node3 kernel:  <b011e0a1> put_files_struct+0x64/0xa6  <b011f006> do_exit+0x1b0/0x6be
Nov 19 03:29:34 node3 kernel:  <b0114e08> bust_spinlocks+0x3a/0x43  <b0103ee6> die+0x1d3/0x288
Nov 19 03:29:34 node3 kernel:  <b0103f76> die+0x263/0x288  <b011533a> do_page_fault+0x441/0x526
Nov 19 03:29:34 node3 kernel:  <b0114ef9> do_page_fault+0x0/0x526  <b01036f7> error_code+0x4f/0x54
Nov 19 03:29:34 node3 kernel:  <f0872d73> ext3_xattr_delete_inode+0x5/0xab [ext3]  <f0865bcb> ext3_free_inode+0x92/0x2c7 [ext3]
Nov 19 03:29:34 node3 kernel:  <f08666ee> ext3_mark_inode_dirty+0x20/0x27 [ext3]  <f08687dd> ext3_delete_inode+0xa3/0xba [ext3]
Nov 19 03:29:34 node3 kernel:  <f086873a> ext3_delete_inode+0x0/0xba [ext3]  <b016809c> generic_delete_inode+0x9e/0x101
Nov 19 03:29:34 node3 kernel:  <b0167b87> iput+0x5e/0x60  <b0166d66> dput+0xfe/0x116
Nov 19 03:29:34 node3 kernel:  <b0160a4f> sys_renameat+0x15f/0x1b9  <b01b04d2> _atomic_dec_and_lock+0x2a/0x44
Nov 19 03:29:34 node3 kernel:  <b0160aba> sys_rename+0x11/0x15  <b0102af3> sysenter_past_esp+0x54/0x75
Nov 19 10:29:11 node3 syslogd 1.4.1#20: restart.


######### 2 #########

Nov 19 10:29:11 node3 kernel: klogd 1.4.1#20, log source = /proc/kmsg started.
Nov 19 10:29:11 node3 kernel: Linux version 2.6.17-2-k7 (Debian 2.6.17-9) (waldi@debian.org) (gcc version 4.1.2 20060901 (prerelease) (Debian 4.1.1-13)) #1 SMP Wed Sep 13 17:18:46 UTC 2006
Nov 19 10:29:11 node3 kernel: BIOS-provided physical RAM map:
Nov 19 10:29:11 node3 kernel:  BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
Nov 19 10:29:11 node3 kernel:  BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
Nov 19 10:29:11 node3 kernel:  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
Nov 19 10:29:11 node3 kernel:  BIOS-e820: 0000000000100000 - 000000003fef0000 (usable)
Nov 19 10:29:11 node3 kernel:  BIOS-e820: 000000003fef0000 - 000000003fef3000 (ACPI NVS)
Nov 19 10:29:11 node3 kernel:  BIOS-e820: 000000003fef3000 - 000000003ff00000 (ACPI data)
Nov 19 10:29:11 node3 kernel:  BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
Nov 19 10:29:11 node3 kernel: 0MB HIGHMEM available.
Nov 19 10:29:11 node3 kernel: 1022MB LOWMEM available.
Nov 19 10:29:11 node3 kernel: found SMP MP-table at 000f4f60
Nov 19 10:29:11 node3 kernel: DMI 2.3 present.
Nov 19 10:29:11 node3 kernel: ACPI: PM-Timer IO Port: 0x4008
Nov 19 10:29:11 node3 kernel: ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Nov 19 10:29:11 node3 kernel: Processor #0 15:7 APIC version 16
Nov 19 10:29:11 node3 kernel: ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
Nov 19 10:29:11 node3 kernel: ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
Nov 19 10:29:11 node3 kernel: ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
Nov 19 10:29:11 node3 kernel: ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
Nov 19 10:29:11 node3 kernel: IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
Nov 19 10:29:11 node3 kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Nov 19 10:29:11 node3 kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
Nov 19 10:29:11 node3 kernel: Enabling APIC mode:  Flat.  Using 1 I/O APICs
Nov 19 10:29:11 node3 kernel: Using ACPI (MADT) for SMP configuration information
Nov 19 10:29:11 node3 kernel: Allocating PCI resources starting at 40000000 (gap: 3ff00000:bed00000)
Nov 19 10:29:11 node3 kernel: Built 1 zonelists
Nov 19 10:29:11 node3 kernel: Kernel command line: auto BOOT_IMAGE=Linux ro root=900 panic=10,append=elevator=deadline
Nov 19 10:29:11 node3 kernel: Enabling fast FPU save and restore... done.
Nov 19 10:29:11 node3 kernel: Enabling unmasked SIMD FPU exception support... done.
Nov 19 10:29:11 node3 kernel: Initializing CPU#0
Nov 19 10:29:11 node3 kernel: PID hash table entries: 4096 (order: 12, 16384 bytes)
Nov 19 10:29:11 node3 kernel: Detected 2199.966 MHz processor.
Nov 19 10:29:11 node3 kernel: Using pmtmr for high-res timesource
Nov 19 10:29:11 node3 kernel: Console: colour VGA+ 80x25
Nov 19 10:29:11 node3 kernel: Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Nov 19 10:29:11 node3 kernel: Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Nov 19 10:29:11 node3 kernel: Memory: 1030860k/1047488k available (1493k kernel code, 16124k reserved, 546k data, 196k init, 0k highmem)
Nov 19 10:29:11 node3 kernel: Checking if this processor honours the WP bit even in supervisor mode... Ok.
Nov 19 10:29:11 node3 kernel: Calibrating delay using timer specific routine.. 4405.86 BogoMIPS (lpj=8811735)
Nov 19 10:29:11 node3 kernel: Security Framework v1.0.0 initialized
Nov 19 10:29:11 node3 kernel: SELinux:  Disabled at boot.
Nov 19 10:29:11 node3 kernel: Capability LSM initialized
Nov 19 10:29:11 node3 kernel: Mount-cache hash table entries: 512
Nov 19 10:29:11 node3 kernel: CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
Nov 19 10:29:11 node3 kernel: CPU: L2 Cache: 1024K (64 bytes/line)
Nov 19 10:29:11 node3 kernel: Intel machine check architecture supported.
Nov 19 10:29:11 node3 kernel: Intel machine check reporting enabled on CPU#0.
Nov 19 10:29:11 node3 kernel: Checking 'hlt' instruction... OK.
Nov 19 10:29:11 node3 kernel: SMP alternatives: switching to UP code
Nov 19 10:29:11 node3 kernel: Freeing SMP alternatives: 16k freed
Nov 19 10:29:11 node3 kernel: CPU0: AMD Athlon(tm) 64 Processor 3700+ stepping 01
Nov 19 10:29:11 node3 kernel: Total of 1 processors activated (4405.86 BogoMIPS).
Nov 19 10:29:11 node3 kernel: ENABLING IO-APIC IRQs
Nov 19 10:29:11 node3 kernel: ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=0 pin2=0
Nov 19 10:29:11 node3 kernel: Brought up 1 CPUs
Nov 19 10:29:11 node3 kernel: migration_cost=0
Nov 19 10:29:11 node3 kernel: checking if image is initramfs... it is
Nov 19 10:29:11 node3 kernel: Freeing initrd memory: 4538k freed
Nov 19 10:29:11 node3 kernel: NET: Registered protocol family 16
Nov 19 10:29:11 node3 kernel: ACPI: bus type pci registered
Nov 19 10:29:11 node3 kernel: PCI: PCI BIOS revision 2.10 entry at 0xfb050, last bus=1
Nov 19 10:29:11 node3 kernel: Setting up standard PCI resources
Nov 19 10:29:11 node3 kernel: ACPI: Subsystem revision 20060127
Nov 19 10:29:11 node3 kernel: ACPI: Interpreter enabled
Nov 19 10:29:11 node3 kernel: ACPI: Using IOAPIC for interrupt routing
Nov 19 10:29:11 node3 kernel: ACPI: PCI Root Bridge [PCI0] (0000:00)
Nov 19 10:29:11 node3 kernel: PCI: Quirk-MSI-K8T Soundcard On
Nov 19 10:29:11 node3 kernel: PCI: Unexpected Value in PCI-Register: no Change!
Nov 19 10:29:11 node3 kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12)
Nov 19 10:29:11 node3 kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 *11 12)
Nov 19 10:29:11 node3 kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 11 *12)
Nov 19 10:29:11 node3 kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12) *0, disabled.
Nov 19 10:29:11 node3 kernel: ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12) *0, disabled.
Nov 19 10:29:11 node3 kernel: ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12) *0, disabled.
Nov 19 10:29:11 node3 kernel: ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 6 7 10 11 12) *0, disabled.
Nov 19 10:29:11 node3 kernel: ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 6 7 10 11 12) *0, disabled.
Nov 19 10:29:11 node3 kernel: ACPI: PCI Interrupt Link [ALKA] (IRQs *20)
Nov 19 10:29:11 node3 kernel: ACPI: PCI Interrupt Link [ALKB] (IRQs *21)
Nov 19 10:29:11 node3 kernel: ACPI: PCI Interrupt Link [ALKC] (IRQs *22), disabled.
Nov 19 10:29:11 node3 kernel: ACPI: PCI Interrupt Link [ALKD] (IRQs *23), disabled.
Nov 19 10:29:11 node3 kernel: Linux Plug and Play Support v0.97 (c) Adam Belay
Nov 19 10:29:11 node3 kernel: pnp: PnP ACPI init
Nov 19 10:29:11 node3 kernel: pnp: PnP ACPI: found 13 devices
Nov 19 10:29:11 node3 kernel: PnPBIOS: Disabled by ACPI PNP
Nov 19 10:29:11 node3 kernel: PCI: Using ACPI for IRQ routing
Nov 19 10:29:11 node3 kernel: PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
Nov 19 10:29:11 node3 kernel: pnp: 00:02: ioport range 0x4000-0x407f could not be reserved
Nov 19 10:29:11 node3 kernel: pnp: 00:02: ioport range 0x5000-0x500f has been reserved
Nov 19 10:29:11 node3 kernel: PCI: Bridge: 0000:00:01.0
Nov 19 10:29:11 node3 kernel:   IO window: disabled.
Nov 19 10:29:11 node3 kernel:   MEM window: fa000000-fcffffff
Nov 19 10:29:11 node3 kernel:   PREFETCH window: f8000000-f9ffffff
Nov 19 10:29:11 node3 kernel: NET: Registered protocol family 2
Nov 19 10:29:11 node3 kernel: IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
Nov 19 10:29:11 node3 kernel: TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
Nov 19 10:29:11 node3 kernel: TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
Nov 19 10:29:11 node3 kernel: TCP: Hash tables configured (established 131072 bind 65536)
Nov 19 10:29:11 node3 kernel: TCP reno registered
Nov 19 10:29:11 node3 kernel: audit: initializing netlink socket (disabled)
Nov 19 10:29:11 node3 kernel: audit(1163928519.296:1): initialized
Nov 19 10:29:11 node3 kernel: VFS: Disk quotas dquot_6.5.1
Nov 19 10:29:11 node3 kernel: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Nov 19 10:29:11 node3 kernel: Initializing Cryptographic API
Nov 19 10:29:11 node3 kernel: io scheduler noop registered
Nov 19 10:29:11 node3 kernel: io scheduler anticipatory registered (default)
Nov 19 10:29:11 node3 kernel: io scheduler deadline registered
Nov 19 10:29:11 node3 kernel: io scheduler cfq registered
Nov 19 10:29:11 node3 kernel: isapnp: Scanning for PnP cards...
Nov 19 10:29:11 node3 kernel: isapnp: No Plug & Play device found
Nov 19 10:29:11 node3 kernel: Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
Nov 19 10:29:11 node3 kernel: serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Nov 19 10:29:11 node3 kernel: serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Nov 19 10:29:11 node3 kernel: RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
Nov 19 10:29:11 node3 kernel: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
Nov 19 10:29:11 node3 kernel: PNP: PS/2 controller doesn't have AUX irq; using default 12
Nov 19 10:29:11 node3 kernel: serio: i8042 AUX port at 0x60,0x64 irq 12
Nov 19 10:29:11 node3 kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
Nov 19 10:29:11 node3 kernel: TCP bic registered
Nov 19 10:29:11 node3 kernel: NET: Registered protocol family 1
Nov 19 10:29:11 node3 kernel: NET: Registered protocol family 17
Nov 19 10:29:11 node3 kernel: NET: Registered protocol family 8
Nov 19 10:29:11 node3 kernel: NET: Registered protocol family 20
Nov 19 10:29:11 node3 kernel: Using IPI No-Shortcut mode
Nov 19 10:29:11 node3 kernel: ACPI wakeup devices: 
Nov 19 10:29:11 node3 kernel: PCI0 USB0 USB1 USB2 USB3 USB4 USB5 USB6 USB7 LAN0 AC97 UAR1 
Nov 19 10:29:11 node3 kernel: ACPI: (supports S0 S1 S4 S5)
Nov 19 10:29:11 node3 kernel: Freeing unused kernel memory: 196k freed
Nov 19 10:29:11 node3 kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
Nov 19 10:29:11 node3 kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Nov 19 10:29:11 node3 kernel: VP_IDE: IDE controller at PCI slot 0000:00:0f.1
Nov 19 10:29:11 node3 kernel: ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 20
Nov 19 10:29:11 node3 kernel: ACPI: PCI Interrupt 0000:00:0f.1[A] -> Link [ALKA] -> GSI 20 (level, low) -> IRQ 169
Nov 19 10:29:11 node3 kernel: PCI: VIA IRQ fixup for 0000:00:0f.1, from 255 to 9
Nov 19 10:29:11 node3 kernel: VP_IDE: chipset revision 6
Nov 19 10:29:11 node3 kernel: VP_IDE: not 100%% native mode: will probe irqs later
Nov 19 10:29:11 node3 kernel: VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci0000:00:0f.1
Nov 19 10:29:11 node3 kernel:     ide0: BM-DMA at 0xe700-0xe707, BIOS settings: hda:pio, hdb:pio
Nov 19 10:29:11 node3 kernel:     ide1: BM-DMA at 0xe708-0xe70f, BIOS settings: hdc:pio, hdd:pio
Nov 19 10:29:11 node3 kernel: input: AT Translated Set 2 keyboard as /class/input/input0
Nov 19 10:29:11 node3 kernel: input: AT Translated Set 2 keyboard as /class/input/input1
Nov 19 10:29:11 node3 kernel: SCSI subsystem initialized
Nov 19 10:29:11 node3 kernel: ACPI: PCI Interrupt 0000:00:0f.0[B] -> Link [ALKA] -> GSI 20 (level, low) -> IRQ 169
Nov 19 10:29:11 node3 kernel: sata_via 0000:00:0f.0: routed to hard irq line 11
Nov 19 10:29:11 node3 kernel: ata1: SATA max UDMA/133 cmd 0xE100 ctl 0xE202 bmdma 0xE500 irq 169
Nov 19 10:29:11 node3 kernel: ata2: SATA max UDMA/133 cmd 0xE300 ctl 0xE402 bmdma 0xE508 irq 169
Nov 19 10:29:11 node3 kernel: ata1: SATA link up 1.5 Gbps (SStatus 113)
Nov 19 10:29:11 node3 kernel: ata1: dev 0 ATA-7, max UDMA/133, 312581808 sectors: LBA48
Nov 19 10:29:11 node3 kernel: ata1: dev 0 configured for UDMA/133
Nov 19 10:29:11 node3 kernel: scsi0 : sata_via
Nov 19 10:29:11 node3 kernel: ata2: SATA link up 1.5 Gbps (SStatus 113)
Nov 19 10:29:11 node3 kernel: ata2: dev 0 ATA-7, max UDMA/133, 312581808 sectors: LBA48
Nov 19 10:29:11 node3 kernel: ata2: dev 0 configured for UDMA/133
Nov 19 10:29:11 node3 kernel: scsi1 : sata_via
Nov 19 10:29:11 node3 kernel:   Vendor: ATA       Model: ST3160811AS       Rev: 3.AA
Nov 19 10:29:11 node3 kernel:   Type:   Direct-Access                      ANSI SCSI revision: 05
Nov 19 10:29:11 node3 kernel: SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB)
Nov 19 10:29:11 node3 kernel: sda: Write Protect is off
Nov 19 10:29:11 node3 kernel: SCSI device sda: drive cache: write back
Nov 19 10:29:11 node3 kernel: SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB)
Nov 19 10:29:11 node3 kernel: sda: Write Protect is off
Nov 19 10:29:11 node3 kernel: SCSI device sda: drive cache: write back
Nov 19 10:29:11 node3 kernel:  sda: sda1 sda2 sda3
Nov 19 10:29:11 node3 kernel: sd 0:0:0:0: Attached scsi disk sda
Nov 19 10:29:11 node3 kernel:   Vendor: ATA       Model: ST3160811AS       Rev: 3.AA
Nov 19 10:29:11 node3 kernel:   Type:   Direct-Access                      ANSI SCSI revision: 05
Nov 19 10:29:11 node3 kernel: SCSI device sdb: 312581808 512-byte hdwr sectors (160042 MB)
Nov 19 10:29:11 node3 kernel: sdb: Write Protect is off
Nov 19 10:29:11 node3 kernel: SCSI device sdb: drive cache: write back
Nov 19 10:29:11 node3 kernel: SCSI device sdb: 312581808 512-byte hdwr sectors (160042 MB)
Nov 19 10:29:11 node3 kernel: sdb: Write Protect is off
Nov 19 10:29:11 node3 kernel: SCSI device sdb: drive cache: write back
Nov 19 10:29:11 node3 kernel:  sdb: sdb1 sdb2 sdb3
Nov 19 10:29:11 node3 kernel: sd 1:0:0:0: Attached scsi disk sdb
Nov 19 10:29:11 node3 kernel: md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
Nov 19 10:29:11 node3 kernel: md: bitmap version 4.39
Nov 19 10:29:11 node3 kernel: md: raid1 personality registered for level 1
Nov 19 10:29:11 node3 kernel: md: raid0 personality registered for level 0
Nov 19 10:29:11 node3 kernel: usbcore: registered new driver usbfs
Nov 19 10:29:11 node3 kernel: usbcore: registered new driver hub
Nov 19 10:29:11 node3 kernel: ACPI: PCI Interrupt Link [ALKB] enabled at IRQ 21
Nov 19 10:29:11 node3 kernel: ACPI: PCI Interrupt 0000:00:10.4[C] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 177
Nov 19 10:29:11 node3 kernel: ehci_hcd 0000:00:10.4: EHCI Host Controller
Nov 19 10:29:11 node3 kernel: ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1
Nov 19 10:29:11 node3 kernel: ehci_hcd 0000:00:10.4: irq 177, io mem 0xfd020000
Nov 19 10:29:11 node3 kernel: ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
Nov 19 10:29:11 node3 kernel: usb usb1: configuration #1 chosen from 1 choice
Nov 19 10:29:11 node3 kernel: hub 1-0:1.0: USB hub found
Nov 19 10:29:11 node3 kernel: hub 1-0:1.0: 8 ports detected
Nov 19 10:29:11 node3 kernel: USB Universal Host Controller Interface driver v3.0
Nov 19 10:29:11 node3 kernel: ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 177
Nov 19 10:29:11 node3 kernel: PCI: VIA IRQ fixup for 0000:00:10.0, from 10 to 1
Nov 19 10:29:11 node3 kernel: uhci_hcd 0000:00:10.0: UHCI Host Controller
Nov 19 10:29:11 node3 kernel: uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
Nov 19 10:29:11 node3 kernel: uhci_hcd 0000:00:10.0: irq 177, io base 0x0000e800
Nov 19 10:29:11 node3 kernel: usb usb2: configuration #1 chosen from 1 choice
Nov 19 10:29:11 node3 kernel: hub 2-0:1.0: USB hub found
Nov 19 10:29:11 node3 kernel: hub 2-0:1.0: 2 ports detected
Nov 19 10:29:11 node3 kernel: ACPI: PCI Interrupt 0000:00:10.1[A] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 177
Nov 19 10:29:11 node3 kernel: PCI: VIA IRQ fixup for 0000:00:10.1, from 10 to 1
Nov 19 10:29:11 node3 kernel: uhci_hcd 0000:00:10.1: UHCI Host Controller
Nov 19 10:29:11 node3 kernel: uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
Nov 19 10:29:11 node3 kernel: uhci_hcd 0000:00:10.1: irq 177, io base 0x0000e900
Nov 19 10:29:11 node3 kernel: usb usb3: configuration #1 chosen from 1 choice
Nov 19 10:29:11 node3 kernel: hub 3-0:1.0: USB hub found
Nov 19 10:29:11 node3 kernel: hub 3-0:1.0: 2 ports detected
Nov 19 10:29:11 node3 kernel: ACPI: PCI Interrupt 0000:00:10.2[B] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 177
Nov 19 10:29:11 node3 kernel: PCI: VIA IRQ fixup for 0000:00:10.2, from 11 to 1
Nov 19 10:29:11 node3 kernel: uhci_hcd 0000:00:10.2: UHCI Host Controller
Nov 19 10:29:11 node3 kernel: uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
Nov 19 10:29:11 node3 kernel: uhci_hcd 0000:00:10.2: irq 177, io base 0x0000ea00
Nov 19 10:29:11 node3 kernel: usb usb4: configuration #1 chosen from 1 choice
Nov 19 10:29:11 node3 kernel: hub 4-0:1.0: USB hub found
Nov 19 10:29:11 node3 kernel: hub 4-0:1.0: 2 ports detected
Nov 19 10:29:11 node3 kernel: ACPI: PCI Interrupt 0000:00:10.3[B] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 177
Nov 19 10:29:11 node3 kernel: PCI: VIA IRQ fixup for 0000:00:10.3, from 11 to 1
Nov 19 10:29:11 node3 kernel: uhci_hcd 0000:00:10.3: UHCI Host Controller
Nov 19 10:29:11 node3 kernel: uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5
Nov 19 10:29:11 node3 kernel: uhci_hcd 0000:00:10.3: irq 177, io base 0x0000eb00
Nov 19 10:29:11 node3 kernel: usb usb5: configuration #1 chosen from 1 choice
Nov 19 10:29:11 node3 kernel: hub 5-0:1.0: USB hub found
Nov 19 10:29:11 node3 kernel: hub 5-0:1.0: 2 ports detected
Nov 19 10:29:11 node3 kernel: r8169 Gigabit Ethernet driver 2.2LK-NAPI loaded
Nov 19 10:29:11 node3 kernel: ACPI: PCI Interrupt 0000:00:0d.0[A] -> GSI 16 (level, low) -> IRQ 185
Nov 19 10:29:11 node3 kernel: eth0: RTL8169 at 0xf0824000, 00:16:17:6b:35:34, IRQ 185
Nov 19 10:29:11 node3 kernel: md: linear personality registered for level -1
Nov 19 10:29:11 node3 kernel: md: multipath personality registered for level -4
Nov 19 10:29:11 node3 kernel: raid5: automatically using best checksumming function: pIII_sse
Nov 19 10:29:11 node3 kernel:    pIII_sse  :  6718.000 MB/sec
Nov 19 10:29:11 node3 kernel: raid5: using function: pIII_sse (6718.000 MB/sec)
Nov 19 10:29:11 node3 kernel: md: raid5 personality registered for level 5
Nov 19 10:29:11 node3 kernel: md: raid4 personality registered for level 4
Nov 19 10:29:11 node3 kernel: raid6: int32x1    828 MB/s
Nov 19 10:29:11 node3 kernel: raid6: int32x2    926 MB/s
Nov 19 10:29:11 node3 kernel: raid6: int32x4    813 MB/s
Nov 19 10:29:11 node3 kernel: raid6: int32x8    570 MB/s
Nov 19 10:29:11 node3 kernel: raid6: mmxx1     1822 MB/s
Nov 19 10:29:11 node3 kernel: raid6: mmxx2     3328 MB/s
Nov 19 10:29:11 node3 kernel: raid6: sse1x1    1660 MB/s
Nov 19 10:29:11 node3 kernel: raid6: sse1x2    2707 MB/s
Nov 19 10:29:11 node3 kernel: raid6: sse2x1    2828 MB/s
Nov 19 10:29:11 node3 kernel: raid6: sse2x2    3417 MB/s
Nov 19 10:29:11 node3 kernel: raid6: using algorithm sse2x2 (3417 MB/s)
Nov 19 10:29:11 node3 kernel: md: raid6 personality registered for level 6
Nov 19 10:29:11 node3 kernel: md: raid10 personality registered for level 10
Nov 19 10:29:11 node3 kernel: md: md0 stopped.
Nov 19 10:29:11 node3 kernel: ata2: status=0x51 { DriveReady SeekComplete Error }
Nov 19 10:29:11 node3 kernel: ata2: error=0x40 { UncorrectableError }
Nov 19 10:29:11 node3 kernel: ata2: status=0x51 { DriveReady SeekComplete Error }
Nov 19 10:29:11 node3 kernel: ata2: error=0x40 { UncorrectableError }
Nov 19 10:29:11 node3 kernel: ata2: status=0x51 { DriveReady SeekComplete Error }
Nov 19 10:29:11 node3 kernel: ata2: error=0x40 { UncorrectableError }
Nov 19 10:29:11 node3 kernel: md: bind<sdb1>
Nov 19 10:29:11 node3 kernel: md: bind<sda1>
Nov 19 10:29:11 node3 kernel: raid1: raid set md0 active with 2 out of 2 mirrors
Nov 19 10:29:11 node3 kernel: md: md1 stopped.
Nov 19 10:29:11 node3 kernel: md: bind<sdb3>
Nov 19 10:29:11 node3 kernel: md: bind<sda3>
Nov 19 10:29:11 node3 kernel: md1: setting max_sectors to 128, segment boundary to 32767
Nov 19 10:29:11 node3 kernel: raid0: looking at sda3
Nov 19 10:29:11 node3 kernel: raid0:   comparing sda3(125041856) with sda3(125041856)
Nov 19 10:29:11 node3 kernel: raid0:   END
Nov 19 10:29:11 node3 kernel: raid0:   ==> UNIQUE
Nov 19 10:29:11 node3 kernel: raid0: 1 zones
Nov 19 10:29:11 node3 kernel: raid0: looking at sdb3
Nov 19 10:29:11 node3 kernel: raid0:   comparing sdb3(125041856) with sda3(125041856)
Nov 19 10:29:11 node3 kernel: raid0:   EQUAL
Nov 19 10:29:11 node3 kernel: raid0: FINAL 1 zones
Nov 19 10:29:11 node3 kernel: raid0: done.
Nov 19 10:29:11 node3 kernel: raid0 : md_size is 250083712 blocks.
Nov 19 10:29:11 node3 kernel: raid0 : conf->hash_spacing is 250083712 blocks.
Nov 19 10:29:11 node3 kernel: raid0 : nb_zone is 1.
Nov 19 10:29:11 node3 kernel: raid0 : Allocating 4 bytes for hash.
Nov 19 10:29:11 node3 kernel: EXT3-fs: INFO: recovery required on readonly filesystem.
Nov 19 10:29:11 node3 kernel: EXT3-fs: write access will be enabled during recovery.
Nov 19 10:29:11 node3 kernel: kjournald starting.  Commit interval 5 seconds
Nov 19 10:29:11 node3 kernel: EXT3-fs: recovery complete.
Nov 19 10:29:11 node3 kernel: EXT3-fs: mounted filesystem with ordered data mode.
Nov 19 10:29:11 node3 kernel: Real Time Clock Driver v1.12ac
Nov 19 10:29:11 node3 kernel: parport: PnPBIOS parport detected.
Nov 19 10:29:11 node3 kernel: parport0: PC-style at 0x378, irq 7 [PCSPP]
Nov 19 10:29:11 node3 kernel: input: PC Speaker as /class/input/input2
Nov 19 10:29:11 node3 kernel: Linux agpgart interface v0.101 (c) Dave Jones
Nov 19 10:29:11 node3 kernel: agpgart: Detected AGP bridge 0
Nov 19 10:29:11 node3 kernel: agpgart: AGP aperture is 128M @ 0xf0000000
Nov 19 10:29:11 node3 kernel: atkbd.c: Spurious ACK on isa0060/serio0. Some program, like XFree86, might be trying access hardware directly.
Nov 19 10:29:11 node3 kernel: 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Nov 19 10:29:11 node3 kernel: 00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Nov 19 10:29:11 node3 kernel: FDC 0 is a post-1991 82077
Nov 19 10:29:11 node3 kernel: pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Nov 19 10:29:11 node3 kernel: shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Nov 19 10:29:11 node3 kernel: Adding 1951888k swap on /dev/sda2.  Priority:1 extents:1 across:1951888k
Nov 19 10:29:11 node3 kernel: Adding 1951888k swap on /dev/sdb2.  Priority:1 extents:1 across:1951888k
Nov 19 10:29:11 node3 kernel: EXT3 FS on md0, internal journal
Nov 19 10:29:11 node3 kernel: device-mapper: 4.6.0-ioctl (2006-02-17) initialised: dm-devel@redhat.com
Nov 19 10:29:11 node3 kernel: ata2: status=0x51 { DriveReady SeekComplete Error }
Nov 19 10:29:11 node3 kernel: ata2: error=0x40 { UncorrectableError }
Nov 19 10:29:11 node3 kernel: ata2: status=0x51 { DriveReady SeekComplete Error }
Nov 19 10:29:11 node3 kernel: ata2: error=0x40 { UncorrectableError }
Nov 19 10:29:11 node3 kernel: ata2: status=0x51 { DriveReady SeekComplete Error }
Nov 19 10:29:11 node3 kernel: ata2: error=0x40 { UncorrectableError }
Nov 19 10:29:11 node3 kernel: ata2: status=0x51 { DriveReady SeekComplete Error }
Nov 19 10:29:11 node3 kernel: ata2: error=0x40 { UncorrectableError }
Nov 19 10:29:11 node3 kernel: kjournald starting.  Commit interval 5 seconds
Nov 19 10:29:11 node3 kernel: EXT3 FS on md1, internal journal
Nov 19 10:29:11 node3 kernel: EXT3-fs: mounted filesystem with ordered data mode.
Nov 19 10:29:11 node3 kernel: r8169: eth0: link up
Nov 19 10:29:11 node3 kernel: IPv4 over IPv4 tunneling driver
Nov 19 10:29:14 node3 kernel: NET: Registered protocol family 10
Nov 19 10:29:14 node3 kernel: lo: Disabled Privacy Extensions
Nov 19 10:29:14 node3 kernel: IPv6 over IPv4 tunneling driver
Nov 19 11:21:30 node3 last message repeated 2 times
Nov 19 14:18:16 node3 kernel: f0865ed1
Nov 19 14:18:16 node3 kernel: Modules linked in: ipv6 ipip tunnel4 dm_snapshot dm_mirror dm_mod shpchp pci_hotplug evdev floppy i2c_viapro 8250_pnp psmouse amd64_agp agpgart i2c_core pcspkr serio_raw parport_pc parport rtc raid10 raid6 raid5 xor multipath linear ide_generic r8169 uhci_hcd ehci_hcd usbcore thermal processor fan raid0 raid1 md_mod sata_via sd_mod libata scsi_mod via82cxxx ide_core ext3 jbd mbcache
Nov 19 14:18:16 node3 kernel: EIP:    0060:[<f0865ed1>]    Not tainted VLI
Nov 19 14:18:16 node3 kernel: EFLAGS: 00010282   (2.6.17-2-k7 #1) 
Nov 19 14:22:35 node3 syslogd 1.4.1#20: restart.